The BelAire Wall System is comprised of composite fibre cement/EPS sandwich panels supported by our unique high tensile post system. Below you will find all the general specifications that cover our residential line of wall products. For more comprehensive information about our residential products, please download the PDF link below or contact Modular Wall Systems.
This information is suitable for use in wind regions A, B, and C (D upon request) AS 1170.2-2002 Loading Code. For wind regions C&D we will provide site-specific installation and construction advice. If you have any doubt about the wind region your wall will be in, seek advice from your local building consent authority. It is the responsibility of the owner/installer to determine the wind region, terrain category and soil conditions. The information listed here is a guide only to help ascertain these factors and gain a general understanding of the different types of wall systems we offer.
Our walls provide superb sound attenuation properties. For a full understanding of what can be achieved, please see the Sound Reduction page.
Available heights: 0.6-metres – 2.1-metres
The Classic Wall is the most cost effective of our three styles and is most commonly used in domestic boundary wall applications. This style of wall also supplies great sound reduction qualities.
Contemporary walls have an overall panel thickness of 50mm and an 80mm top wall capping. Posts measure 180 (face) x 120mm (depth). Each standard section has an effective coverage of 2530mm or 2830mm, post centre to post centre. Please refer to the table below for footing depths.
Available heights: 0.6 metres to 3 metres
The Signature Wall is most commonly used where a true masonry wall look is desired or in a commercial security/sound wall application. This wall has superb sound reduction qualities (National Acoustic Laboratory tested).
Traditional walls have an overall panel thickness of 70mm and a 100mm top wall capping. Posts measure 280mm (face) x 140 mm (depth) and are designed around a single brick in width. Each standard section has an effective coverage of 2630mm, 2930mm or 3230mm, post centre to post centre. Please refer to the table below for footing depths.
Available heights from 600mm – 3000mm
The Estate Wall is most commonly used where a true grand masonry wall look is desired. The post face is equivalent to a brick and a half in width. This wall has superb sound reduction qualities (National Acoustic Laboratory tested).
Estate walls have an overall panel thickness of 70mm and a 100mm top wall capping. Posts measure 320 (face) x 210 mm (depth). Each standard section has an effective coverage of 2680mm, 2980mm or 3280mm, post centre to post centre. Please refer to the table below for footing depths.
Wall Panels – BelAire proprietary composite panels
Our wall panels are a Fibre Cement/EPS composite sandwich panel manufactured by us to rigid quality guidelines. An average panel weight is 34kg (2400 x 900) or 15.49kgs m2 with two standard panel thickness of 50 or 70mm.
Panels can be stacked to achieve various wall heights. For example, a 1.8-metre high wall consists of 2 x 0.9-metre panels in a stack configuration.
Durability, Impact & Load Testing
Stringent quality and constant testing will ensure your wall will withstand the rigours of daily life. Our testing regime includes performing load and impact testing to conform to all major roadway authorities.
Standard Post Centre to Post Centre Guide
The table below allows you to work out what your post centres will be. For example, if you have a 2.4-metre panel, and you are using Classic posts, then you will have a 2530mm post centre to post centre measurement. If you have a 2.4-metre panel, and you are using Signature posts, then you will have a 2630mm post centre to post centre measurement.
Footing Depth Table
3.0 metre high walls may not be suitable for all regions. Please consult BelAire before the design stage so we can ascertain if additional materials are required.