Introduction
The Belaire Designer Fencing System is NZ Owned, Designed and Manufactured.
PRODUCT NAME:
BelAire Designer Fencing – providing the Classic, Signature and Estate series of designer walls and fences
APPLICABLE IN:
All NZ Wind Regions- A, B & C. BelAire have installed walls of varying heights into all
NZ Wind Regions and Terrain conditions.
DESCRIPTION:
A Modular Wall System comprises of Fibre Cement/EPS Composite Sandwich Panels supported by Formed high tensile galvanised steel support columns.
APPLICATION & USE:
Typically used as Acoustic Sound Barriers or where a Masonry look wall is desired. Ideal for high wind area’s, unstable ground conditions, difficult access sites and were conventional strip footings aren’t allowed or suitable.
SAFETY:
The lightweight nature of the product enhances safety on site and allows very fast construction times without the need for cranes and heavy digging equipment.
ADVANTAGES:
• Fast construction times
• No strip footings mean the wall has room for expansion and contraction within the unique post system.
• Termite resistant
• Fire resistant with a non combustible surface
• Will not rot
• Maintenance free
• Smooth exterior surface which accepts all exterior grade paints.
PROPERTIES:
Wall Panels: Fibre Cement outer skins with an EPS core. Composite Panel Density: 15.49kg m² (based on 70mm proprietary sound panel)
Support columns: Formed high tensile galvanised steel, top coated with a conversion primer and
universal grey finish ready to accept self priming exterior grade paints.
Trims and capping: Formed high tensile galvanised steel, top coated with a conversion
primer and universal grey finish ready to accept self priming exterior grade paints.
Product Specifications
Click here to download the Product Specifications.
General Overview Only
Wall Types: Classic, Signature & Estate
Wall Heights: 900mm – 3000mm
This information is suitable for use in wind regions A,B & C of AS/NZ 1170.2-2002 SAA Loading Code. If you have any doubt about the wind region your wall will be in, get advice from your local building consent authority. It is the responsibility of the installer/owner to determine the wind region, terrain category and soil conditions. This publication is a guide only to help ascertain these factors and gain a general understanding of the different types of Modular Walls available.
Our Products
Classic: Available heights from 900mm – 2100mm
Classic walls have an overall panel thickness of 50mm and a 80mm top wall capping. Posts measure 180 (face) x 120mm (depth). Each standard section has an effective coverage of 2.53 or 2.83 meters, post centre to post centre. The classic wall is the most cost effective of the 3 styles and most commonly used in domestic boundary/screening wall applications. This style of wall will also supply great sound reduction qualities.
Wall Panel: 50mm thickness – Density of composite panel materials: 15.49kg m2
Posts: 180 (width) x 120 (depth) x 0.95 mm BMT
Post centres: 2530mm & 2830mm
Signature: Available heights from 900mm – 3000mm
Signature walls have an overall panel thickness of 70mm and a 100mm top wall capping. Posts measure 280mm (face) x 140 mm (depth) and designed around a single brick in width. Each standard section has an effective coverage of 2.63, 2.93 or 3.23 meters, post centre to post centre. The Signature wall is most commonly used were a true masonry wall look is desired or in a commercial security/sound wall application. The wall has superb sound reduction qualities (National Acoustic Laboratory tested)
Wall Panel: 70mm thickness – Density of composite panel materials: 15.49kg m2
Posts: 280 (width) x 140 (depth) x 0.95 mm BMT
Post centres: 2630mm, 2930mm & 3230mm
Estate: Available heights from 900mm – 3000mm
Estate walls have an overall panel thickness of 70mm and a 100mm top wall capping. Posts measure 320 (face) x 210 mm (depth). Each standard section has an effective coverage of 2.68, 2.98 or 3.28 meters, post centre to post centre. The Estate wall is most commonly used were a true ‘Grand’ masonry wall look is desired. The post face is equivalent to a brick & a half in width. The wall has superb sound reduction qualities (National Acoustic Laboratory tested)
Wall Panel: 70mm thickness – Density of composite panel materials: 15.49kg m2
Posts: 320 (width) x 210 (depth) x 0.95 mm BMT
Post centres: 2680mm, 2980mm & 3280mm
Standard ‘Post Centre to Post Centre’ guide
The table below allows you to work out what your post centres will be. Example – If you have a 2400mm panel and you are using Classic posts then you will have a 2530mm post centre to post centre measurement. If you have a 2400mm panel and you are using Signature posts then you will have a 2630mm post centre to post centre measurement.
Footing Depth Table
* 3000mm high walls may not be suitable for all regions. Please consult BelAire prior to the design stage so we can ascertain if additional materials are required example – Shortened free end spacing’s, deeper footings, core filling of posts etc.
